Water hardness in Millbrae, CA

Water in Millbrae is hard, with a median of 174 mg/L (10.2 grains per gallon) across 8 monitoring sites within 10 miles.

10% harder than the California median (158 mg/L) 329th hardest of 484 California towns Population 22,087
174mg/L
10.2 grains per gallon
Hard

Millbrae tap water at a glance

  • HardnessHard (174 mg/L, 10.2 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
  • PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
  • Lead pipesNo lead service lines reported.Details →
  • ViolationsNo health-based violations since 2016.EPA record →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 174 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 10.2 gpg (9.7 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites8
Lab samples12
Sample years2007–2022
Middle 50% of sites149–223 mg/L
Groundwater (wells, springs)174 mg/L · 8 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Millbrae

Prefilled with Millbrae's measured local hardness of 174 mg/L (10.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Millbrae tap water

City of Millbrae is the main public water system for Millbrae. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Aug 2024 – May 2025. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Millbrae

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Burlingame
serves over 10,000 people
None detected — Jun 2023 – Dec 2023
California Water Service - San Mateo
serves over 10,000 people
None detected — May 2024 – Feb 2025
Town of Hillsborough
serves over 10,000 people
None detected — Mar 2024 – Dec 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Millbrae

City of Millbrae reported 6,368 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
6,368not lead (100%)

Other water systems serving parts of Millbrae

Water systemService linesTotal
City of Burlingame0 lead · 0 galvanized · 0 unknown9,242
California Water Service - San Mateo0 lead · 0 galvanized · 0 unknown26,354
Town of Hillsborough0 lead · 0 galvanized · 0 unknown4,365

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Millbrae drinking water violations

EPA records show no health-based violations for City of Millbrae since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Millbrae

Water systemHealth-based violationsMonitoring/reporting
City of BurlingameNone0
California Water Service - San MateoNone0
Town of HillsboroughNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Millbrae

SiteTypeDistanceMedianSamplesYears
004S005W04G001M
USGS California Water Science Center
Well 1.4 mi172 mg/L32011–2022
003S005W33R001M
USGS California Water Science Center
Well 1.7 mi243 mg/L12007
003S005W34B001M
USGS California Water Science Center
Well 2.3 mi216 mg/L12007
004S006W27R001M
USGS California Water Science Center
Well 6.2 mi94 mg/L32011–2021
002S006W35G005M
USGS California Water Science Center
Well 9.3 mi176 mg/L12007
002S006W35G002M
USGS California Water Science Center
Well 9.3 mi249 mg/L12007

Water hardness in towns near Millbrae

TownDistanceMedianClass
Burlingame2 mi 194 mg/LVery hard
San Bruno2 mi 174 mg/LHard
Hillsborough4 mi 194 mg/LVery hard
South San Francisco4 mi 174 mg/LHard
Pacifica4 mi 174 mg/LHard
San Mateo6 mi 230 mg/LVery hard
Daly City7 mi 176 mg/LHard
Belmont8 mi 283 mg/LVery hard
Foster City9 mi 158 mg/LHard
Half Moon Bay9 mi 243 mg/LVery hard

San Mateo County

Millbrae is in San Mateo County, where the median is 243 mg/L (very hard) across 13 sites.

See all of San Mateo County →

California

The statewide median is 158 mg/L (hard) from 5,772 sites.

California hardness map →

Millbrae, CA water: common questions

Do I need a water softener in Millbrae?

Many homes here use one. Water measured around Millbrae is 10.2 gpg (174 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 18,000 grains.Size it for your household →

Who supplies Millbrae's drinking water?

The main public water system serving Millbrae in EPA records is City of Millbrae. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Millbrae?

Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next