Water hardness in Fillmore, CA

Water in Fillmore is very hard, with a median of 484 mg/L (28.3 grains per gallon) across 8 monitoring sites within 10 miles.

206% harder than the California median (158 mg/L) 20th hardest of 484 California towns Population 17,190
484mg/L
28.3 grains per gallon
Very hard

Fillmore tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 484 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 28.3 gpg (27.1 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites8
Lab samples13
Sample years2000–2022
Middle 50% of sites426–569 mg/L
Groundwater (wells, springs)505 mg/L · 7 sites
Surface water (rivers, lakes)463 mg/L · 1 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Fillmore

Prefilled with Fillmore's measured local hardness of 484 mg/L (28.3 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Fillmore tap water

Fillmore Water Dept is the main public water system for Fillmore. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Mar 2024 – Sep 2024. No PFAS were found at or above EPA's minimum reporting levels.

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Fillmore

Fillmore Water Dept reported 4,570 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
4,570not lead (100%)

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Fillmore drinking water violations

EPA records show no health-based violations for Fillmore Water Dept since 2016. It also had 3 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Fillmore

SiteTypeDistanceMedianSamplesYears
004N019W33M005S
USGS California Water Science Center
Well 2.2 mi505 mg/L32007–2022
004N020W32R001S
USGS California Water Science Center
Well 4.5 mi744 mg/L12007
003N020W36G001S
USGS California Water Science Center
Well 6.8 mi268 mg/L22017–2022
004N018W20M002S
USGS California Water Science Center
Well 7 mi605 mg/L12011
004N018W29F001S
USGS California Water Science Center
Well 7.2 mi373 mg/L12007
003N021W11J005S
USGS California Water Science Center
Well 7.9 mi557 mg/L32007–2022

Water hardness in towns near Fillmore

TownDistanceMedianClass
Moorpark8 mi 582 mg/LVery hard
Santa Paula9 mi 469 mg/LVery hard
Simi Valley13 mi 140 mg/LHard
Camarillo14 mi 446 mg/LVery hard
Thousand Oaks14 mi 140 mg/LHard
Oak Park17 mi 751 mg/LVery hard
Castaic17 mi 376 mg/LVery hard
Stevenson Ranch19 mi 390 mg/LVery hard
Agoura Hills19 mi 744 mg/LVery hard
San Buenaventura (Ventura)21 mi 547 mg/LVery hard

Ventura County

Fillmore is in Ventura County, where the median is 469 mg/L (very hard) across 65 sites.

See all of Ventura County →

California

The statewide median is 158 mg/L (hard) from 5,772 sites.

California hardness map →

Fillmore, CA water: common questions

Do I need a water softener in Fillmore?

Very likely. Water measured around Fillmore is 28.3 gpg (484 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 49,000 grains.Size it for your household →

Who supplies Fillmore's drinking water?

The main public water system serving Fillmore in EPA records is Fillmore Water Dept. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Fillmore?

Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next