Water hardness in Tempe, AZ

Water in Tempe is very hard, with a median of 202 mg/L (11.8 grains per gallon) across 10 monitoring sites within 10 miles.

about the same as the Arizona median (205 mg/L) 34th hardest of 65 Arizona towns Population 189,834
202mg/L
11.8 grains per gallon
Very hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Tempe can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

Tempe tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 202 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 11.8 gpg (11.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites10
Lab samples89
Sample years2002–2026
Middle 50% of sites159–420 mg/L
Groundwater (wells, springs)406 mg/L · 6 sites
Surface water (rivers, lakes)147 mg/L · 4 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Tempe

Prefilled with Tempe's measured local hardness of 202 mg/L (11.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Tempe tap water

City of Tempe is the main public water system for Tempe. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 24 samples taken Jul 2023 – Mar 2025. 9 PFAS were detected. The highest PFHxS and PFOS and PFOA results were above EPA's drinking water limit (10 ppt / 4 ppt).

ChemicalHighest resultDetected inEPA limit
PFHxS
perfluorohexane sulfonic acid
70.5 ppt 8 of 24 samples 10 ppt*
PFOS
perfluorooctane sulfonic acid
55.8 ppt 10 of 24 samples 4 ppt
PFOA
perfluorooctanoic acid
38.7 ppt 8 of 24 samples 4 ppt
PFBS
perfluorobutane sulfonic acid
25.7 ppt 16 of 24 samples —
PFHxA
perfluorohexanoic acid
22.5 ppt 6 of 24 samples —
PFPeA
perfluoropentanoic acid
14.4 ppt 6 of 24 samples —
PFBA
perfluorobutanoic acid
9.9 ppt 3 of 24 samples —
PFPeS
perfluoropentane sulfonic acid
8 ppt 2 of 24 samples —
PFHpA
perfluoroheptanoic acid
7 ppt 4 of 24 samples —

Other water systems serving parts of Tempe

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Phoenix
serves over 10,000 people
PFBS, PFBA — Jan 2023 – Dec 2023
City of Chandler
serves over 10,000 people
PFBS, PFPeA, PFBA +1 more — Jul 2023 – Apr 2025
City of Scottsdale
serves over 10,000 people
PFBS — Jan 2025 – Dec 2025
City of Mesa
serves over 10,000 people
PFBS, PFHxS, PFHxA — Feb 2023 – Nov 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Tempe

City of Tempe reported 47,330 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 2,465 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
2,465unknown material (5%)
44,865not lead (95%)

Other water systems serving parts of Tempe

Water systemService linesTotal
City of Phoenix0 lead · 506 galvanized · 227,517 unknown500,208
City of Chandler0 lead · 0 galvanized · 26,497 unknown89,377
City of Scottsdale0 lead · 0 galvanized · 5,100 unknown92,407
City of Mesa0 lead · 74 galvanized · 22,430 unknown170,966

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Tempe drinking water violations

EPA records show 2 health-based violations for City of Tempe since 2016, all since resolved or closed. The most recent began in Oct 2017. It also had 12 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Surface water treatment (Long Term 2 rule)
extra treatment or covered reservoirs to protect against microbes
Treatment requirement not met 1 Oct 2017 Resolved/closed
Total trihalomethanes (TTHM)
byproducts formed when chlorine reacts with natural matter in water · what it means
highest measured 0.085 MG/L; limit 0.080 mg/L
Contaminant above legal limit 1 Apr 2017 Resolved/closed

Other water systems serving parts of Tempe

Water systemHealth-based violationsMonitoring/reporting
City of Phoenix13
City of Chandler1155
City of ScottsdaleNone17
City of MesaNone91

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Tempe

SiteTypeDistanceMedianSamplesYears
A-01-05 30BBA
USGS Arizona Water Science Center
Well 2.8 mi433 mg/L12002
101316
AZDEQ_SW
Lake 3.2 mi202 mg/L592009–2013
101493
AZDEQ_SW
River/Stream 3.7 mi150 mg/L22005
40th Street and the Salt River at Phoenix, Az.
USGS Arizona Water Science Center
Stream 3.8 mi69 mg/L192009–2018
ESTES EW-PZ7
AZDEQ_GW
Well 4.2 mi380 mg/L12026
D-01-05 04CCC2
USGS Arizona Water Science Center
Well 4.5 mi186 mg/L12002

Water hardness in towns near Tempe

TownDistanceMedianClass
Chandler9 mi 194 mg/LVery hard
Paradise Valley11 mi 202 mg/LVery hard
Gilbert12 mi 186 mg/LVery hard
Mesa12 mi 186 mg/LVery hard
Sun Lakes13 mi 203 mg/LVery hard
Phoenix16 mi 218 mg/LVery hard
Glendale18 mi 203 mg/LVery hard
Fountain Hills19 mi 538 mg/LVery hard
Scottsdale21 mi 203 mg/LVery hard
Queen Creek21 mi 195 mg/LVery hard

Maricopa County

Tempe is in Maricopa County, where the median is 203 mg/L (very hard) across 383 sites.

See all of Maricopa County →

Arizona

The statewide median is 205 mg/L (very hard) from 3,750 sites.

Arizona hardness map →

Tempe, AZ water: common questions

Do I need a water softener in Tempe?

Very likely. Water measured around Tempe is 11.8 gpg (202 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 21,000 grains.Size it for your household →

Who supplies Tempe's drinking water?

The main public water system serving Tempe in EPA records is City of Tempe. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Tempe?

It depends on what you want to remove. In Tempe, EPA testing found PFHxS, PFOS and PFOA and 6 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 2 health-based violations since 2016, for the Long Term 2 Enhanced Surface Water Treatment Rule and TTHM; the utility's annual report says what was done about them. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next