Water hardness in Phoenix, AZ

Tap water in Phoenix is very hard: about 218 mg/L (12.7 grains per gallon), ranging from 148 to 288 mg/L, as reported by City of Phoenix Water Services.

about the same as the Arizona median (205 mg/L) 29th hardest of 65 Arizona towns Population 1,650,070
218mg/L
12.7 grains per gallon
Very hard

Utility-reported value. The 2023 Water Quality Report lists total hardness of 148 to 288 mg/L (8.6 to 16.8 gpg), depending on the water source serving your area. Value shown is the midpoint. Source: City of Phoenix Water Services (2023).

Phoenix tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 218 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 12.7 gpg (12.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Local source water measurements

Median of nearby sites196 mg/L
Monitoring sites20
Lab samples130
Sample years2000–2019
Middle 50% of sites67–404 mg/L
Groundwater (wells, springs)316 mg/L · 12 sites
Surface water (rivers, lakes)63 mg/L · 8 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Phoenix

Prefilled with Phoenix's utility-reported hardness of 218 mg/L (12.7 gpg).

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Phoenix tap water

City of Phoenix is the main public water system for Phoenix. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 53 samples taken Jan 2023 – Dec 2023. 2 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFBS
perfluorobutane sulfonic acid
16 ppt 12 of 52 samples —
PFBA
perfluorobutanoic acid
6 ppt 6 of 52 samples —

Other water systems serving parts of Phoenix

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Scottsdale
serves over 10,000 people
PFBS — Jan 2025 – Dec 2025
City of Glendale
serves over 10,000 people
PFBS — Jun 2024 – Mar 2025
Liberty Water Lpsco
serves over 10,000 people
PFPeA, PFHxA, PFBA +5 more 10.2 / 14.1 ppt Sep 2023 – Apr 2024
City of Tempe
serves over 10,000 people
PFHxS, PFOS, PFOA +6 more 38.7 / 55.8 ppt Jul 2023 – Mar 2025
City of Avondale
serves over 10,000 people
PFPeA, PFBS, PFOA +5 more 13.5 / 11.7 ppt Apr 2024 – Jan 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Phoenix

City of Phoenix reported 500,208 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 506 are galvanized lines that must be replaced, and 227,517 are still of unknown material.

0lead (0%)
506galvanized requiring replacement
227,517unknown material (45%)
272,185not lead (54%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask City of Phoenix whether your address is on its list.

Other water systems serving parts of Phoenix

Water systemService linesTotal
City of Scottsdale0 lead · 0 galvanized · 5,100 unknown92,407
City of Glendale0 lead · 0 galvanized · 5,774 unknown70,420
Liberty Water Lpsco0 lead · 0 galvanized · 1,453 unknown22,279
City of Tempe0 lead · 0 galvanized · 2,465 unknown47,330
City of Avondale0 lead · 0 galvanized · 2,294 unknown29,252

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Phoenix drinking water violations

EPA records show 1 health-based violation for City of Phoenix since 2016, all since resolved or closed. The most recent began in Jan 2021. It also had 3 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Surface water treatment (filtration/turbidity)
filtration requirements that protect against microbes such as Cryptosporidium
Treatment requirement not met 1 Jan 2021 Resolved/closed

Other water systems serving parts of Phoenix

Water systemHealth-based violationsMonitoring/reporting
City of ScottsdaleNone17
City of GlendaleNone36
Liberty Water Lpsco15
City of Tempe212
City of AvondaleNone5

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Phoenix

SiteTypeDistanceMedianSamplesYears
DUNLAP AND 7TH AVENUE @ PHOENIX, AZ
USGS Arizona Water Science Center
Stream 0.5 mi34 mg/L222005–2018
101043
AZDEQ_SW
Lake 1.7 mi203 mg/L22009
101044
AZDEQ_SW
Lake 2.4 mi199 mg/L22009
A-03-02 27DBB
USGS Arizona Water Science Center
Well 2.7 mi415 mg/L22008–2018
A-03-02 16AAA
USGS Arizona Water Science Center
Well 4.4 mi613 mg/L12008
CC-4
Arizona Department of Environmental Quality
Well 4.5 mi230 mg/L12001

Water hardness in towns near Phoenix

TownDistanceMedianClass
Glendale6 mi 203 mg/LVery hard
Paradise Valley8 mi 202 mg/LVery hard
Sun City12 mi 183 mg/LVery hard
El Mirage14 mi 111 mg/LModerately hard
Scottsdale15 mi 203 mg/LVery hard
Tempe16 mi 202 mg/LVery hard
Sun City West17 mi 95 mg/LModerately hard
Anthem19 mi 264 mg/LVery hard
Peoria19 mi 268 mg/LVery hard
Fountain Hills20 mi 538 mg/LVery hard

Maricopa County

Phoenix is in Maricopa County, where the median is 203 mg/L (very hard) across 383 sites.

See all of Maricopa County →

Arizona

The statewide median is 205 mg/L (very hard) from 3,750 sites.

Arizona hardness map →

Phoenix, AZ water: common questions

Do I need a water softener in Phoenix?

Very likely. Phoenix's tap water is 12.7 gpg (218 mg/L, utility-reported), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 22,000 grains.Size it for your household →

Who supplies Phoenix's drinking water?

The main public water system serving Phoenix in EPA records is City of Phoenix. Some neighborhoods may be served by a different system, so check the name on your water bill.City of Phoenix Water Services water quality report →

Do I need a water filter in Phoenix?

It depends on what you want to remove. In Phoenix, EPA testing found PFBS and PFBA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 1 health-based violation since 2016, for the Interim Enhanced Surface Water Treatment Rule; the utility's annual report says what was done about it. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next