Tankless water heaters and hard water

Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content

Short answer: hard water is harder on tankless water heaters than on tanks, because scale forms right in the small heat exchanger passages. In hard-water areas, descale about every six months (Rheem's guidance), keep the inlet filter clean, and consider softening or conditioning the water above about 7 grains per gallon (120 mg/L).

Why tankless heaters are sensitive to scale

A tank heater warms a large volume of water slowly, and most scale falls to the bottom of the tank. A tankless heater heats water as it flows through a compact heat exchanger at high intensity. Calcium carbonate forms on those hot surfaces and narrows the passages, which cuts flow, makes temperature control harder and can trigger shutdowns.

In the industry-funded Battelle laboratory study, tankless gas heaters fed very hard water (26 grains per gallon) stopped working because of scale after the equivalent of about 1.6 years of use, while units on softened water kept their rated efficiency. Real homes rarely have water that hard, but the direction is clear: the harder the water, the more maintenance a tankless unit needs.

Is your water hard enough to matter?

CityHardnessClassTankless upkeep
New York, NY 31 mg/L · 1.8 gpg Soft Yearly service
Los Angeles, CA 170 mg/L · 9.9 gpg Hard Descale ~every 6 months; consider softening
Chicago, IL 135 mg/L · 7.9 gpg Hard Descale ~every 6 months; consider softening
Phoenix, AZ 218 mg/L · 12.7 gpg Very hard Descale ~every 6 months; consider softening
Philadelphia, PA 125 mg/L · 7.3 gpg Hard Descale ~every 6 months; consider softening
San Antonio, TX 300 mg/L · 17.5 gpg Very hard Descale ~every 6 months; consider softening
San Diego, CA 276 mg/L · 16.1 gpg Very hard Descale ~every 6 months; consider softening
Dallas, TX 138 mg/L · 8.1 gpg Hard Descale ~every 6 months; consider softening
Jacksonville, FL 246 mg/L · 14.4 gpg Very hard Descale ~every 6 months; consider softening
Austin, TX 93 mg/L · 5.4 gpg Moderately hard Yearly descale
Fort Worth, TX 128 mg/L · 7.5 gpg Hard Descale ~every 6 months; consider softening
Columbus, OH 115 mg/L · 6.7 gpg Moderately hard Yearly descale
Charlotte, NC 39 mg/L · 2.3 gpg Soft Yearly service
Indianapolis, IN 292 mg/L · 17.1 gpg Very hard Descale ~every 6 months; consider softening
San Francisco, CA 8 mg/L · 0.5 gpg Soft Yearly service
Seattle, WA 28 mg/L · 1.6 gpg Soft Yearly service
Denver, CO 105 mg/L · 6.1 gpg Moderately hard Yearly descale
Las Vegas, NV 280 mg/L · 16.4 gpg Very hard Descale ~every 6 months; consider softening
Boston, MA 16 mg/L · 0.9 gpg Soft Yearly service
Detroit, MI 116 mg/L · 6.8 gpg Moderately hard Yearly descale
Louisville/Jefferson County metro government, KY 135 mg/L · 7.9 gpg Hard Descale ~every 6 months; consider softening
Milwaukee, WI 138 mg/L · 8.1 gpg Hard Descale ~every 6 months; consider softening
Kansas City, MO 100 mg/L · 5.8 gpg Moderately hard Yearly descale
Aurora, CO 136 mg/L · 7.9 gpg Hard Descale ~every 6 months; consider softening
New Orleans, LA 101 mg/L · 5.9 gpg Moderately hard Yearly descale
Cleveland, OH 117 mg/L · 6.8 gpg Moderately hard Yearly descale
Henderson, NV 304 mg/L · 17.8 gpg Very hard Descale ~every 6 months; consider softening
Lubbock, TX 192 mg/L · 11.2 gpg Very hard Descale ~every 6 months; consider softening
Paradise, NV 280 mg/L · 16.4 gpg Very hard Descale ~every 6 months; consider softening
Sioux Falls, SD 250 mg/L · 14.6 gpg Very hard Descale ~every 6 months; consider softening
Amarillo, TX 238 mg/L · 13.9 gpg Very hard Descale ~every 6 months; consider softening
Oxnard, CA 319 mg/L · 18.6 gpg Very hard Descale ~every 6 months; consider softening
Sunrise Manor, NV 280 mg/L · 16.4 gpg Very hard Descale ~every 6 months; consider softening
Spring Valley, NV 280 mg/L · 16.4 gpg Very hard Descale ~every 6 months; consider softening
Corona, CA 146 mg/L · 8.5 gpg Hard Descale ~every 6 months; consider softening
Syracuse, NY 127 mg/L · 7.4 gpg Hard Descale ~every 6 months; consider softening
Metairie, LA 78 mg/L · 4.6 gpg Moderately hard Yearly descale
Warren, MI 105 mg/L · 6.1 gpg Moderately hard Yearly descale
West Valley City, UT 176 mg/L · 10.3 gpg Hard Descale ~every 6 months; consider softening
Simi Valley, CA 140 mg/L · 8.2 gpg Hard Descale ~every 6 months; consider softening
Thousand Oaks, CA 140 mg/L · 8.2 gpg Hard Descale ~every 6 months; consider softening
Vallejo, CA 153 mg/L · 8.9 gpg Hard Descale ~every 6 months; consider softening
Concord, CA 74 mg/L · 4.3 gpg Moderately hard Yearly descale
Independence, MO 123 mg/L · 7.2 gpg Hard Descale ~every 6 months; consider softening
West Jordan, UT 183 mg/L · 10.7 gpg Very hard Descale ~every 6 months; consider softening
Richmond, CA 68 mg/L · 4 gpg Moderately hard Yearly descale
Carlsbad, CA 230 mg/L · 13.4 gpg Very hard Descale ~every 6 months; consider softening
Santa Maria, CA 315 mg/L · 18.4 gpg Very hard Descale ~every 6 months; consider softening
Enterprise, NV 280 mg/L · 16.4 gpg Very hard Descale ~every 6 months; consider softening
Centennial, CO 105 mg/L · 6.1 gpg Moderately hard Yearly descale
Dearborn, MI 102 mg/L · 6 gpg Moderately hard Yearly descale
Yuma, AZ 345 mg/L · 20.2 gpg Very hard Descale ~every 6 months; consider softening
Whitney, NV 280 mg/L · 16.4 gpg Very hard Descale ~every 6 months; consider softening
Winchester, NV 280 mg/L · 16.4 gpg Very hard Descale ~every 6 months; consider softening

Tap water hardness as published by each city's water utility. For any other town, look it up on the map.

How to protect a tankless water heater

  1. Descale on schedule. About once a year in average water and about every six months in hard water. Most units have isolation valves with service ports for flushing with vinegar or an approved descaler.
  2. Clean the inlet water filter screen at each service.
  3. Don't set the temperature higher than you need. Scale forms faster at higher temperatures.
  4. Treat the water. A water softener removes the hardness. A scale-prevention conditioner (for example template-assisted crystallization) leaves the minerals in but may reduce scale; check that your heater's manufacturer accepts it. See salt-free vs salt-based.
  5. Check the warranty. Many manufacturers spell out water quality limits and maintenance requirements; scale damage may not be covered if they weren't followed.

Tank or tankless in a hard-water area?

Both need more care in hard water: tanks collect sediment and wear anode rods, tankless units need regular descaling. If you're choosing a new heater and your water is hard or very hard, budget for either a softener or a descaling routine with a tankless unit. For tank heaters, see hard water and your water heater.

Frequently asked questions

Is a tankless water heater a good idea with hard water?

It can be, but it needs more care. Tankless heat exchangers have narrow passages that scale can narrow or block, so in hard water plan to descale about every six months, or soften or treat the water.

How often should you descale a tankless water heater?

Rheem recommends flushing a tankless unit about once a year, and more often (about every six months) where water is hard.

How do I know my tankless heater needs descaling?

Common signs are lower hot water flow, temperature swings, longer waits for hot water, and service or error codes that point to scale. Many units display a maintenance reminder.

Can I descale a tankless water heater myself?

Many owners do it with a pump, hoses and vinegar or a manufacturer-approved descaler through the service valves. Rheem advises that tasks involving gas lines, burners or electrical parts are best left to a licensed professional.

Sources

Related guides