Why is my toilet tank not filling?
Updated November 21, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: a tank that won't fill or fills slowly almost always has a problem with the fill valve: debris blocking it, or a valve that is simply old (7 years or more), according to the fill valve maker Fluidmaster. Flushing debris out of the valve often fixes it in a few minutes; if not, replace the valve.
Before you start: is the water on?
Check that the shut-off valve on the wall behind the toilet is fully open; it is sometimes knocked or left half closed after cleaning. If other taps in the house are also weak, the problem isn't the toilet: see low water pressure.
Flush debris out of the fill valve
Fluidmaster's method for its fill valves (other brands are similar; check your valve's instructions):
- Turn off the water supply and flush the toilet to empty the tank.
- Remove the cap on top of the fill valve and check the seal underneath for debris or wear.
- Hold a cup upside down over the open valve (so water doesn't spray out) and turn the water supply on full force for 10–15 seconds. This flushes debris out of the valve and supply line.
- Turn the water off, refit the cap and seal (replace the seal if it is worn), and turn the water back on.
When to replace the fill valve
If flushing out debris doesn't restore normal filling, Fluidmaster's next step is to repair or replace the valve. Valves in use for 7 years or more are more likely to have worn parts. Fill valve makers sell universal replacement valves; check the packaging against your tank and note the old valve's height before you buy.
Where water is hard, mineral scale adds to the debris that collects in valves and screens. Check your town on the water hardness map.
Tank fills but the toilet keeps running?
That's the opposite problem, usually a worn flapper letting water leak into the bowl. See why a toilet keeps running, including EPA's 10-minute food coloring test, and how much water a toilet uses per flush.
Frequently asked questions
Why is my toilet tank not filling?
The fill valve is the usual culprit. The fill valve maker Fluidmaster says debris that builds up in the water system, and valves that have been in use for 7 years or more, are the main reasons a tank fills slowly or not at all.
How do I fix a slow-filling toilet?
Turn off the water and flush to empty the tank, remove the fill valve cap, check the seal for debris, then hold a cup upside down over the open valve and turn the water on full for 10 to 15 seconds to flush debris out. If that doesn't help, repair or replace the fill valve.
How long should a toilet take to refill?
It varies with the toilet and your water pressure. If refilling has become much slower than it used to be, debris in the fill valve or supply line is the likely cause.
Is a cistern the same as a toilet tank?
Yes. In Australia, New Zealand and the UK the tank is called the cistern; the fill valve and fixes are the same.