Water hardness in Richmond, TX

Water in Richmond is hard, with a median of 180 mg/L (10.5 grains per gallon) across 3 monitoring sites within 10 miles.

about the same as the Texas median (194 mg/L) 122nd hardest of 251 Texas towns Population 12,816
180mg/L
10.5 grains per gallon
Hard

Richmond tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 180 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 10.5 gpg (10.1 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites3
Lab samples18
Sample years2000–2014
Middle 50% of sites174–207 mg/L
Groundwater (wells, springs)234 mg/L · 1 sites
Surface water (rivers, lakes)174 mg/L · 2 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Richmond

Prefilled with Richmond's measured local hardness of 180 mg/L (10.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Richmond tap water

City of Richmond is the main public water system for Richmond. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 14 samples taken Jul 2024 – Jun 2025. 4 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFPeA
perfluoropentanoic acid
82 ppt 4 of 14 samples —
PFBA
perfluorobutanoic acid
47.1 ppt 4 of 14 samples —
PFBS
perfluorobutane sulfonic acid
3.9 ppt 3 of 14 samples —
PFHxA
perfluorohexanoic acid
3.9 ppt 2 of 14 samples —

Other water systems serving parts of Richmond

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Rosenberg
serves over 10,000 people
PFPeA, PFBA, PFHxA +1 more — Nov 2024 – Aug 2025
Pecan Grove MUD
serves over 10,000 people
PFPeA, PFBA, PFHxA +2 more — Nov 2024 – Sep 2025
City of Sugar Land - Greatwood
serves over 10,000 people
None detected — Mar 2023 – Sep 2023

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Richmond

City of Richmond reported 7,576 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 187 are galvanized lines that must be replaced, and 1 are still of unknown material.

0lead (0%)
187galvanized requiring replacement
1unknown material (<1%)
7,388not lead (98%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask City of Richmond whether your address is on its list.

Other water systems serving parts of Richmond

Water systemService linesTotal
City of Rosenberg0 lead · 1,614 galvanized · 0 unknown12,463
Pecan Grove MUD0 lead · 0 galvanized · 0 unknown4,439
City of Sugar Land - Greatwood0 lead · 0 galvanized · 0 unknown4,150

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Richmond drinking water violations

EPA records show no health-based violations for City of Richmond since 2016. It also had 4 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Richmond

Water systemHealth-based violationsMonitoring/reporting
City of RosenbergNone18
Pecan Grove MUDNone1
City of Sugar Land - GreatwoodNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Richmond

SiteTypeDistanceMedianSamplesYears
Brazos Rv at Richmond, TX
USGS Texas Water Science Center
Stream 0.2 mi167 mg/L122000–2002
BRAZOS RIVER AT US 90A
Texas Commission on Environmental Quality
River/Stream 0.2 mi180 mg/L42002
JY-65-19-408
USGS Texas Water Science Center
Well 7.5 mi234 mg/L22002–2014

Water hardness in towns near Richmond

TownDistanceMedianClass
Pecan Grove3 mi 180 mg/LHard
Rosenberg4 mi 167 mg/LHard
Sugar Land8 mi 167 mg/LHard
Four Corners9 mi 161 mg/LHard
Mission Bend10 mi 158 mg/LHard
Fulshear11 mi 156 mg/LHard
Cinco Ranch11 mi 170 mg/LHard
Stafford12 mi 154 mg/LHard
Missouri City14 mi 157 mg/LHard
Katy15 mi 244 mg/LVery hard

Fort Bend County

Richmond is in Fort Bend County, where the median is 156 mg/L (hard) across 11 sites.

See all of Fort Bend County →

Texas

The statewide median is 194 mg/L (very hard) from 2,271 sites.

Texas hardness map →

Richmond, TX water: common questions

Do I need a water softener in Richmond?

Many homes here use one. Water measured around Richmond is 10.5 gpg (180 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 19,000 grains.Size it for your household →

Who supplies Richmond's drinking water?

The main public water system serving Richmond in EPA records is City of Richmond. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Richmond?

It depends on what you want to remove. In Richmond, EPA testing found PFPeA, PFBA and PFBS and 1 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next