Water hardness in Clute, TX

Water in Clute is hard, with a median of 148 mg/L (8.7 grains per gallon) across 8 monitoring sites within 10 miles.

24% softer than the Texas median (194 mg/L) 171st hardest of 251 Texas towns Population 10,704
148mg/L
8.7 grains per gallon
Hard

Clute tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 148 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 8.7 gpg (8.3 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites8
Lab samples8
Sample years2012–2012
Middle 50% of sites142–179 mg/L
Groundwater (wells, springs)148 mg/L · 8 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Clute

Prefilled with Clute's measured local hardness of 148 mg/L (8.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Clute tap water

City of Clute is the main public water system for Clute. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 12 samples taken Jan 2023 – Oct 2023. 6 PFAS were detected. Every result with a federal limit was at or below it.

ChemicalHighest resultDetected inEPA limit
PFPeA
perfluoropentanoic acid
175 ppt 7 of 12 samples —
NFDHA 26.9 ppt 2 of 12 samples —
PFBA
perfluorobutanoic acid
12.4 ppt 6 of 12 samples —
PFHxA
perfluorohexanoic acid
8.9 ppt 6 of 12 samples —
PFBS
perfluorobutane sulfonic acid
4.9 ppt 6 of 12 samples —
PFHxS
perfluorohexane sulfonic acid
3.8 ppt 4 of 12 samples 10 ppt*

Other water systems serving parts of Clute

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Freeport
serves over 10,000 people
PFPeA, PFBA, PFHxA +1 more — Mar 2023 – Mar 2024
City of Lake Jackson
serves over 10,000 people
PFPeA, PFBA, PFHxA — Mar 2025 – Feb 2026

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Clute

City of Clute reported 3,719 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 131 are galvanized lines that must be replaced, and 377 are still of unknown material.

0lead (0%)
131galvanized requiring replacement
377unknown material (10%)
3,211not lead (86%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask City of Clute whether your address is on its list.

Other water systems serving parts of Clute

Water systemService linesTotal
City of Freeport0 lead · 465 galvanized · 199 unknown4,117
City of Lake Jackson0 lead · 24 galvanized · 0 unknown9,614

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Clute drinking water violations

EPA records show no health-based violations for City of Clute since 2016. It also had 4 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Clute

Water systemHealth-based violationsMonitoring/reporting
City of FreeportNone3
City of Lake JacksonNone7

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Clute

SiteTypeDistanceMedianSamplesYears
BH-65-61-923
USGS Texas Water Science Center
Well 0.8 mi182 mg/L12012
BH-65-61-607
USGS Texas Water Science Center
Well 2.7 mi178 mg/L12012
BH-81-06-213
USGS Texas Water Science Center
Well 4.8 mi148 mg/L12012
BH-81-06-212
USGS Texas Water Science Center
Well 4.8 mi149 mg/L12012
BH-81-06-107
USGS Texas Water Science Center
Well 5 mi130 mg/L12012
BH-81-06-524
USGS Texas Water Science Center
Well 8.3 mi106 mg/L12012

Water hardness in towns near Clute

TownDistanceMedianClass
Lake Jackson4 mi 148 mg/LHard
Freeport6 mi 148 mg/LHard
Angleton10 mi 182 mg/LVery hard
Galveston28 mi 259 mg/LVery hard
Iowa Colony29 mi 160 mg/LHard
Alvin29 mi 162 mg/LHard
Santa Fe31 mi 228 mg/LVery hard
Manvel32 mi 160 mg/LHard
La Marque34 mi 259 mg/LVery hard
Bay City34 mi 154 mg/LHard

Brazoria County

Clute is in Brazoria County, where the median is 160 mg/L (hard) across 40 sites.

See all of Brazoria County →

Texas

The statewide median is 194 mg/L (very hard) from 2,271 sites.

Texas hardness map →

Clute, TX water: common questions

Do I need a water softener in Clute?

Many homes here use one. Water measured around Clute is 8.7 gpg (148 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 15,000 grains.Size it for your household →

Who supplies Clute's drinking water?

The main public water system serving Clute in EPA records is City of Clute. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Clute?

It depends on what you want to remove. In Clute, EPA testing found PFPeA, NFDHA and PFBA and 3 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next