Water hardness in Oklahoma City, OK

Water in Oklahoma City is very hard, with a median of 219 mg/L (12.8 grains per gallon) across 41 monitoring sites within 10 miles.

about the same as the Oklahoma median (231 mg/L) 18th hardest of 45 Oklahoma towns Population 702,767
219mg/L
12.8 grains per gallon
Very hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Oklahoma City can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

Oklahoma City tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 219 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 12.8 gpg (12.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites41
Lab samples309
Sample years2000–2023
Middle 50% of sites164–332 mg/L
Groundwater (wells, springs)216 mg/L · 34 sites
Surface water (rivers, lakes)332 mg/L · 7 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Oklahoma City

Prefilled with Oklahoma City's measured local hardness of 219 mg/L (12.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Oklahoma City tap water

The City of Oklahoma City water system is the main public water system for Oklahoma City. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Jan 2024 – Oct 2024. 1 PFAS was detected.

ChemicalHighest resultDetected inEPA limit
PFPeA
perfluoropentanoic acid
4.7 ppt 3 of 8 samples —

Other water systems serving parts of Oklahoma City

Water systemPFAS detectedHighest PFOA / PFOSTested
Midwest City
serves over 10,000 people
None detected — Apr 2023 – Apr 2025
Del City
serves over 10,000 people
PFBA, PFPeA, PFHxA — Dec 2023 – Sep 2024
Norman
serves over 10,000 people
PFBA, PFBS — Oct 2023 – Mar 2025
EL Reno
serves over 10,000 people
None detected — Jan 2025 – Oct 2025
Yukon
serves over 10,000 people
None detected — Apr 2023 – Apr 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Oklahoma City

The City of Oklahoma City water system reported 254,388 service lines (the pipes connecting homes to the water main) in its inventory. 173 are lead and 6 are galvanized lines that must be replaced, and 32,667 are still of unknown material.

173lead (<1%)
6galvanized requiring replacement
32,667unknown material (13%)
221,542not lead (87%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Oklahoma City water system whether your address is on its list.

Other water systems serving parts of Oklahoma City

Water systemService linesTotal
Midwest City0 lead · 0 galvanized · 15,392 unknown21,540
Del City0 lead · 0 galvanized · 0 unknown8,924
Norman Utilities Authority13 lead · 960 galvanized · 20,887 unknown42,749
EL Reno0 lead · 0 galvanized · 4,561 unknown6,093
Yukon0 lead · 0 galvanized · 0 unknown9,693

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Oklahoma City drinking water violations

EPA records show no health-based violations for the City of Oklahoma City water system since 2016.

Other water systems serving parts of Oklahoma City

Water systemHealth-based violationsMonitoring/reporting
Midwest CityNone9
Del City11
Norman12
EL Reno1113
YukonNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Oklahoma City

SiteTypeDistanceMedianSamplesYears
Crooked Oak Creek: HWY 13 Bridge
Oklahoma Conservation Commission (State)
River/Stream 3.1 mi452 mg/L72000
12N-02W-30 BCC 1
USGS Oklahoma Water Science Center
Well 3.4 mi414 mg/L12003
12N-02W-30 BAB 2
USGS Oklahoma Water Science Center
Well 3.8 mi299 mg/L12008
11N-02W-05 CBD 1
USGS Oklahoma Water Science Center
Well 4.3 mi215 mg/L32004
DEL CITY, CITY OF-WELL 25
Oklahoma Dept. of Environmental Quality
Well 4.3 mi164 mg/L32004
12N-03W-10 ADA 1
USGS Oklahoma Water Science Center
Well 4.6 mi356 mg/L52003–2004

Water hardness in towns near Oklahoma City

TownDistanceMedianClass
Del City4 mi 217 mg/LVery hard
Warr Acres7 mi 363 mg/LVery hard
Bethany8 mi 370 mg/LVery hard
Midwest City8 mi 212 mg/LVery hard
Moore10 mi 157 mg/LHard
Mustang13 mi 261 mg/LVery hard
Choctaw14 mi 212 mg/LVery hard
Yukon15 mi 378 mg/LVery hard
Edmond15 mi 204 mg/LVery hard
Newcastle16 mi 31 mg/LSoft

Oklahoma County

Oklahoma City is in Oklahoma County, where the median is 216 mg/L (very hard) across 72 sites.

See all of Oklahoma County →

Oklahoma

The statewide median is 231 mg/L (very hard) from 1,773 sites.

Oklahoma hardness map →

Oklahoma City, OK water: common questions

Do I need a water softener in Oklahoma City?

Very likely. Water measured around Oklahoma City is 12.8 gpg (219 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 23,000 grains.Size it for your household →

Who supplies Oklahoma City's drinking water?

The main public water system serving Oklahoma City in EPA records is Oklahoma City. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Oklahoma City?

It depends on what you want to remove. In Oklahoma City, EPA testing found PFPeA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 173 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next