Water hardness in Reading, OH

Water in Reading is very hard, with a median of 282 mg/L (16.5 grains per gallon) across 54 monitoring sites within 10 miles.

about the same as the Ohio median (276 mg/L) 77th hardest of 183 Ohio towns Population 10,380
282mg/L
16.5 grains per gallon
Very hard

Reading tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 282 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 16.5 gpg (15.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites54
Lab samples500
Sample years2000–2024
Middle 50% of sites226–319 mg/L
Groundwater (wells, springs)428 mg/L · 8 sites
Surface water (rivers, lakes)266 mg/L · 46 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Reading

Prefilled with Reading's measured local hardness of 282 mg/L (16.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Reading tap water

Reading City PWS is the main public water system for Reading. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jan 2025 – Oct 2025. 1 PFAS was detected.

ChemicalHighest resultDetected inEPA limit
PFPeA
perfluoropentanoic acid
4.9 ppt 2 of 4 samples —

Other water systems serving parts of Reading

Water systemPFAS detectedHighest PFOA / PFOSTested
Cincinnati Public Water System
serves over 10,000 people
PFOS, PFBA, PFBS ND / 6.1 ppt May 2023 – Feb 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Reading

Reading City PWS reported 3,613 service lines (the pipes connecting homes to the water main) in its inventory. 259 are lead and 0 are galvanized lines that must be replaced, and 960 are still of unknown material.

259lead (7%)
0galvanized requiring replacement
960unknown material (27%)
2,394not lead (66%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Reading City PWS whether your address is on its list.

Other water systems serving parts of Reading

Water systemService linesTotal
Cincinnati Public Water System34,673 lead · 44 galvanized · 45 unknown238,335

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Reading drinking water violations

EPA records show no health-based violations for Reading City PWS since 2016. It also had 8 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Reading

Water systemHealth-based violationsMonitoring/reporting
Cincinnati Public Water SystemNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Reading

SiteTypeDistanceMedianSamplesYears
MILL CREEK AT READING @ W. COLUMBIA RD.
Division of Surface water (Ohio) (State)
River/Stream 0.7 mi266 mg/L122002
MILL CREEK AT EVENDALE @ FORMICA ENTRANCE ROAD
Division of Surface water (Ohio) (State)
River/Stream 1.5 mi232 mg/L122002
H-156 MIAM NAWQA LUS WELL BVAS URB-31 CINCINNATI
USGS Ohio Water Science Center
Well 1.7 mi442 mg/L22001–2020
MILL CREEK DST. WEST FORK @ ANTHONY WAYNE AVE.
Division of Surface water (Ohio) (State)
River/Stream 2.5 mi228 mg/L322015–2024
H-10
USGS Ohio Water Science Center
Well 2.6 mi110 mg/L12000
MILL CREEK AT SHARONVILLE @ SHARON RD.
Division of Surface water (Ohio) (State)
River/Stream 3.1 mi232 mg/L182001–2014

Water hardness in towns near Reading

TownDistanceMedianClass
Blue Ash3 mi 276 mg/LVery hard
Sharonville4 mi 286 mg/LVery hard
Finneytown4 mi 284 mg/LVery hard
Norwood5 mi 261 mg/LVery hard
Montgomery5 mi 265 mg/LVery hard
Springdale5 mi 291 mg/LVery hard
Forest Park7 mi 288 mg/LVery hard
Cincinnati7 mi 262 mg/LVery hard
Northbrook8 mi 288 mg/LVery hard
Loveland9 mi 266 mg/LVery hard

Hamilton County

Reading is in Hamilton County, where the median is 268 mg/L (very hard) across 79 sites.

See all of Hamilton County →

Ohio

The statewide median is 276 mg/L (very hard) from 6,849 sites.

Ohio hardness map →

Reading, OH water: common questions

Do I need a water softener in Reading?

Very likely. Water measured around Reading is 16.5 gpg (282 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 29,000 grains.Size it for your household →

Who supplies Reading's drinking water?

The main public water system serving Reading in EPA records is Reading City PWS. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Reading?

It depends on what you want to remove. In Reading, EPA testing found PFPeA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 259 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next