Water hardness in Harrison, OH

Water in Harrison is very hard, with a median of 282 mg/L (16.5 grains per gallon) across 50 monitoring sites within 10 miles.

about the same as the Ohio median (276 mg/L) 76th hardest of 183 Ohio towns Population 13,320
282mg/L
16.5 grains per gallon
Very hard

Harrison tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 282 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 16.5 gpg (15.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites50
Lab samples306
Sample years2000–2024
Middle 50% of sites260–304 mg/L
Groundwater (wells, springs)312 mg/L · 13 sites
Surface water (rivers, lakes)275 mg/L · 37 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Harrison

Prefilled with Harrison's measured local hardness of 282 mg/L (16.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Harrison tap water

Harrison City PWS is the main public water system for Harrison. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 2 samples taken Jun 2024 – Dec 2024. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Harrison

Water systemPFAS detectedHighest PFOA / PFOSTested
Southwest Regional Water District
serves over 10,000 people
PFBS — Apr 2023 – Oct 2023
Cincinnati Public Water System
serves over 10,000 people
PFOS, PFBA, PFBS ND / 6.1 ppt May 2023 – Feb 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Harrison

Harrison City PWS reported 4,347 service lines (the pipes connecting homes to the water main) in its inventory. 3 are lead and 5 are galvanized lines that must be replaced, and 2,714 are still of unknown material.

3lead (<1%)
5galvanized requiring replacement
2,714unknown material (62%)
1,625not lead (37%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Harrison City PWS whether your address is on its list.

Other water systems serving parts of Harrison

Water systemService linesTotal
Southwest Regional Water District0 lead · 0 galvanized · 10,529 unknown16,099
Cincinnati Public Water System34,673 lead · 44 galvanized · 45 unknown238,335

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Harrison drinking water violations

EPA records show no health-based violations for Harrison City PWS since 2016. It also had 3 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Harrison

Water systemHealth-based violationsMonitoring/reporting
Southwest Regional Water DistrictNone0
Cincinnati Public Water SystemNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Harrison

SiteTypeDistanceMedianSamplesYears
H-151 MIAM NAWQA SUS WELL BVAS-27
USGS Ohio Water Science Center
Well 0.9 mi360 mg/L12019
H-157 MIAM NAWQA LUS WELL BVAS URB-04 HARRISON, OH
USGS Ohio Water Science Center
Well 1.1 mi338 mg/L22001–2020
LEE CREEK NEAR MOUTH
Division of Surface water (Ohio) (State)
River/Stream 1.3 mi304 mg/L32017
H-158 MIAM NAWQA LUS WELL BVAS URB-03 HARRISON, OH
USGS Ohio Water Science Center
Well 1.6 mi409 mg/L92001–2020
JAMESON CREEK ADJ. LAWRENCEBURG RD.
Division of Surface water (Ohio) (State)
River/Stream 1.9 mi325 mg/L32017
WHITEWATER R. AT HARRISON @ OHIO/INDIANA STATE LINE
Division of Surface water (Ohio) (State)
River/Stream 1.9 mi273 mg/L52017

Water hardness in towns near Harrison

TownDistanceMedianClass
Dent8 mi 285 mg/LVery hard
Mack9 mi 270 mg/LVery hard
White Oak10 mi 286 mg/LVery hard
Bridgetown11 mi 264 mg/LVery hard
Monfort Heights11 mi 274 mg/LVery hard
Northbrook11 mi 288 mg/LVery hard
Fairfield14 mi 289 mg/LVery hard
Forest Park14 mi 288 mg/LVery hard
Finneytown15 mi 284 mg/LVery hard
Hamilton15 mi 295 mg/LVery hard

Hamilton County

Harrison is in Hamilton County, where the median is 268 mg/L (very hard) across 79 sites.

See all of Hamilton County →

Ohio

The statewide median is 276 mg/L (very hard) from 6,849 sites.

Ohio hardness map →

Harrison, OH water: common questions

Do I need a water softener in Harrison?

Very likely. Water measured around Harrison is 16.5 gpg (282 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 29,000 grains.Size it for your household →

Who supplies Harrison's drinking water?

The main public water system serving Harrison in EPA records is Harrison City PWS. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Harrison?

It depends on what you want to remove. In Harrison, the system reports 3 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next