Water hardness in Rome, NY
Water in Rome is hard, with a median of 171 mg/L (10 grains per gallon) across 16 monitoring sites within 10 miles.
Rome tap water at a glance
- HardnessHard (171 mg/L, 10 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesThe water system reported 392 lead service lines.Check your own pipe →
- Violations1 health-based violation since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 171 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 10 gpg (9.6 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Rome
Prefilled with Rome's measured local hardness of 171 mg/L (10 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Rome tap water
Rome City is the main public water system for Rome. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jul 2023 – Apr 2024. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Rome
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Oneida City serves over 10,000 people | None detected | — | Feb 2024 – Nov 2024 |
| OCWA serves over 10,000 people | PFBA | — | Mar 2023 – Dec 2023 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Rome
Rome City reported 9,948 service lines (the pipes connecting homes to the water main) in its inventory. 392 are lead and 6 are galvanized lines that must be replaced, and 8,820 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Rome City whether your address is on its list.
Other water systems serving parts of Rome
| Water system | Service lines | Total |
|---|---|---|
| Oneida City | 448 lead · 17 galvanized · 75 unknown | 3,970 |
| OCWA | 400 lead · 3,495 galvanized · 72,099 unknown | 116,509 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Rome drinking water violations
EPA records show 1 health-based violation for Rome City since 2016, all since resolved or closed. The most recent began in Jun 2026. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Surface Water Treatment Rule filtration and disinfection of river and lake water | Treatment requirement not met | 1 | Jun 2026 | Resolved/closed |
Other water systems serving parts of Rome
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Oneida City | None | 1 |
| OCWA | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Rome
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Wood Creek in Rome NYS Dept. of EnCon, Division of Water | River/Stream | 1.2 mi | 178 mg/L | 4 | 2002 |
| OE2848 USGS New York Water Science Center | Well | 3.6 mi | 260 mg/L | 1 | 2007 |
| MOHAWK RIVER BELOW DELTA DAM NEAR ROME NY USGS New York Water Science Center | Stream | 3.8 mi | 63 mg/L | 1 | 2014 |
| OE4082 USGS New York Water Science Center | Well | 3.8 mi | 96 mg/L | 1 | 2017 |
| OE1670, NY USGS New York Water Science Center | Well | 4 mi | 442 mg/L | 2 | 2022 |
| Six Mile Creek New York State Dec Division Of Water (State) | River/Stream | 5.5 mi | 106 mg/L | 9 | 2011 |
Water hardness in towns near Rome
| Town | Distance | Median | Class |
|---|---|---|---|
| Oneida | 14 mi | 648 mg/L | Very hard |
| Utica | 16 mi | 272 mg/L | Very hard |
| Syracuse | 35 mi | 127 mg/L | Hard |
| Fairmount | 40 mi | 438 mg/L | Very hard |
| Fulton | 47 mi | 231 mg/L | Very hard |
| Oswego | 53 mi | 197 mg/L | Very hard |
| Cortland | 56 mi | 209 mg/L | Very hard |
| Watertown | 56 mi | 188 mg/L | Very hard |
| Oneonta | 57 mi | 67 mg/L | Moderately hard |
| Auburn | 58 mi | 173 mg/L | Hard |
Oneida County
Rome is in Oneida County, where the median is 160 mg/L (hard) across 68 sites.
See all of Oneida County →New York
The statewide median is 77 mg/L (moderately hard) from 2,847 sites.
New York hardness map →Rome, NY water: common questions
Do I need a water softener in Rome?
Many homes here use one. Water measured around Rome is 10 gpg (171 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 18,000 grains.Size it for your household →
Who supplies Rome's drinking water?
The main public water system serving Rome in EPA records is Rome City. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Rome?
It depends on what you want to remove. In Rome, the system reports 392 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 1 health-based violation since 2016, for the Surface Water Treatment Rule; the utility's annual report says what was done about it. On the other hand, no PFAS found in EPA testing. A water softener is not a filter.Check your own service line →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- How to tell if your home has a lead pipe392 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.