Water hardness in Kenmore, NY
Water in Kenmore is very hard, with a median of 200 mg/L (11.7 grains per gallon) across 9 monitoring sites within 10 miles.
Kenmore tap water at a glance
- HardnessVery hard (200 mg/L, 11.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesThe water system reported 1 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 200 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 11.7 gpg (11.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Kenmore
Prefilled with Kenmore's measured local hardness of 200 mg/L (11.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Kenmore tap water
Kenmore Village is the main public water system for Kenmore. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Feb 2024 – Nov 2024. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Kenmore
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Tonawanda, Town Water Dept. serves over 10,000 people | None detected | — | Jul 2024 – Apr 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Kenmore
Kenmore Village reported 5,654 service lines (the pipes connecting homes to the water main) in its inventory. 1 are lead and 11 are galvanized lines that must be replaced, and 5,272 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Kenmore Village whether your address is on its list.
Other water systems serving parts of Kenmore
| Water system | Service lines | Total |
|---|---|---|
| Tonawanda, Town Water Dept. | 5 lead · 7 galvanized · 11,426 unknown | 23,821 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Kenmore drinking water violations
EPA records show no health-based violations for Kenmore Village since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Kenmore
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Tonawanda, Town Water Dept. | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Kenmore
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| ELLICOTT CREEK In Amherst NYS Dept. of EnCon, Division of Water | River/Stream | 5.5 mi | 690 mg/L | 4 | 2001 |
| BUFFALO RIVER in Buffalo NYS Dept. of EnCon, Division of Water | River/Stream | 7.1 mi | 156 mg/L | 40 | 2001–2007 |
| Buffalo River New York State Dec Division Of Water (State) | River/Stream | 7.1 mi | 149 mg/L | 18 | 2008–2012 |
| CAYUGA CREEK IN Cheektowaga NYS Dept. of EnCon, Division of Water | River/Stream | 8.1 mi | 200 mg/L | 21 | 2001–2006 |
| CAZENOVIA CREEK In Buffalo NYS Dept. of EnCon, Division of Water | River/Stream | 8.5 mi | 158 mg/L | 14 | 2001–2006 |
| E2642 USGS New York Water Science Center | Well | 8.5 mi | 664 mg/L | 1 | 2006 |
Water hardness in towns near Kenmore
| Town | Distance | Median | Class |
|---|---|---|---|
| Eggertsville | 3 mi | 207 mg/L | Very hard |
| Tonawanda | 3 mi | 664 mg/L | Very hard |
| Buffalo | 5 mi | 200 mg/L | Very hard |
| North Tonawanda | 6 mi | 636 mg/L | Very hard |
| Cheektowaga | 7 mi | 214 mg/L | Very hard |
| Depew | 9 mi | 207 mg/L | Very hard |
| Lackawanna | 10 mi | 180 mg/L | Very hard |
| West Seneca | 11 mi | 200 mg/L | Very hard |
| Lancaster | 11 mi | 230 mg/L | Very hard |
| Niagara Falls | 11 mi | 482 mg/L | Very hard |
Erie County
Kenmore is in Erie County, where the median is 204 mg/L (very hard) across 40 sites.
See all of Erie County →New York
The statewide median is 77 mg/L (moderately hard) from 2,847 sites.
New York hardness map →Kenmore, NY water: common questions
Do I need a water softener in Kenmore?
Very likely. Water measured around Kenmore is 11.7 gpg (200 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 21,000 grains.Size it for your household →
Who supplies Kenmore's drinking water?
The main public water system serving Kenmore in EPA records is Kenmore Village. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Kenmore?
It depends on what you want to remove. In Kenmore, the system reports 1 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- How to tell if your home has a lead pipe1 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.