Water hardness in Bellevue, NE

Water in Bellevue is very hard, with a median of 310 mg/L (18.1 grains per gallon) across 16 monitoring sites within 10 miles.

29% harder than the Nebraska median (240 mg/L) 3rd hardest of 17 Nebraska towns Population 63,922
310mg/L
18.1 grains per gallon
Very hard

Bellevue tap water at a glance

  • HardnessVery hard (310 mg/L, 18.1 gpg, local measurements). Water softeners are common at this level.Size a water softener →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 310 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 18.1 gpg (17.4 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites16
Lab samples590
Sample years2000–2023
Middle 50% of sites285–316 mg/L
Groundwater (wells, springs)466 mg/L · 2 sites
Surface water (rivers, lakes)305 mg/L · 14 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Bellevue

Prefilled with Bellevue's measured local hardness of 310 mg/L (18.1 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Bellevue tap water

Bellevue is served by more than one water system. These systems supply ZIP codes in Bellevue and were tested for PFAS ("forever chemicals") in EPA's nationwide UCMR 5 study. Check your water bill to see which one is yours.

Water systems serving Bellevue

Water systemPFAS detectedHighest PFOA / PFOSTested
Metropolitan Utilities District
serves over 10,000 people
None detected — Nov 2024 – Aug 2025
City of Papillion
serves over 10,000 people
None detected — Apr 2023 – Oct 2023

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Bellevue

Bellevue is served by more than one water system. Their service line inventories, as reported to EPA:

Water systems serving Bellevue

Water systemService linesTotal
Metropolitan Utilities District11,738 lead · 333 galvanized · 2,505 unknown232,322
City of Papillion0 lead · 0 galvanized · 4,006 unknown14,516

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Bellevue drinking water violations

Bellevue is served by more than one water system. Health-based violations recorded by EPA since 2016:

Water systems serving Bellevue

Water systemHealth-based violationsMonitoring/reporting
Metropolitan Utilities DistrictNone1
City of Papillion30

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Bellevue

SiteTypeDistanceMedianSamplesYears
14N 13E 24AA (M-237)
USGS Nebraska Water Science Center
Well 1.1 mi427 mg/L12010
Missouri R at Fontanelle Forest St Bellevue, Nebr.
USGS Nebraska Water Science Center
Stream 1.7 mi285 mg/L282006–2007
13N 14E 6CACA1 (M-100)
USGS Nebraska Water Science Center
Well 2.9 mi504 mg/L12010
Big Papillion Cr at Old 36th St at Bellevue, Nebr.
USGS Nebraska Water Science Center
Stream 3.4 mi310 mg/L202006–2007
Papillion Creek at Fort Crook, Nebr.
USGS Nebraska Water Science Center
Stream 3.6 mi310 mg/L272006–2007
Papillion Cr at South 42nd St at Bellevue, Nebr.
USGS Nebraska Water Science Center
Stream 4.1 mi240 mg/L192006–2007

Water hardness in towns near Bellevue

TownDistanceMedianClass
La Vista9 mi 260 mg/LVery hard
Papillion9 mi 259 mg/LVery hard
Omaha10 mi 286 mg/LVery hard
Chalco12 mi 260 mg/LVery hard
Fremont36 mi 211 mg/LVery hard
Lincoln47 mi 248 mg/LVery hard
Beatrice76 mi 57 mg/LSoft
Columbus78 mi 322 mg/LVery hard
South Sioux City94 mi 431 mg/LVery hard
Norfolk99 mi 237 mg/LVery hard

Sarpy County

Bellevue is in Sarpy County, where the median is 259 mg/L (very hard) across 57 sites.

See all of Sarpy County →

Nebraska

The statewide median is 240 mg/L (very hard) from 1,041 sites.

Nebraska hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next