Water hardness in Savage, MN

Water in Savage is very hard, with a median of 335 mg/L (19.6 grains per gallon) across 39 monitoring sites within 10 miles.

76% harder than the Minnesota median (190 mg/L) 10th hardest of 102 Minnesota towns Population 32,999
335mg/L
19.6 grains per gallon
Very hard

Savage tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 335 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 19.6 gpg (18.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites39
Lab samples251
Sample years2002–2025
Middle 50% of sites216–381 mg/L
Groundwater (wells, springs)346 mg/L · 5 sites
Surface water (rivers, lakes)333 mg/L · 34 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Savage

Prefilled with Savage's measured local hardness of 335 mg/L (19.6 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Savage tap water

The City of Savage water system is the main public water system for Savage. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Apr 2023 – Sep 2023. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Savage

Water systemPFAS detectedHighest PFOA / PFOSTested
Prior Lake
serves over 10,000 people
None detected — Oct 2024 – Jul 2025
Shakopee
serves over 10,000 people
PFBA, PFHxA, PFPeA +1 more — Jan 2025 – Aug 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Savage

The City of Savage water system reported 10,125 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 2 are galvanized lines that must be replaced, and 1,065 are still of unknown material.

0lead (0%)
2galvanized requiring replacement
1,065unknown material (11%)
9,058not lead (89%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Savage water system whether your address is on its list.

Other water systems serving parts of Savage

Water systemService linesTotal
Prior Lake0 lead · 8 galvanized · 434 unknown9,919
Shakopee0 lead · 0 galvanized · 2,864 unknown12,328

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Savage drinking water violations

EPA records show 2 health-based violations for the City of Savage water system since 2016, all since resolved or closed. The most recent began in Apr 2024.

Contaminant or ruleTypeViolationsMost recentStatus
Radium
naturally occurring radioactive element in some groundwater
highest measured 6.3 PCI/L; limit 5 pCi/L
Contaminant above legal limit 2 Apr 2024 Resolved/closed

Other water systems serving parts of Savage

Water systemHealth-based violationsMonitoring/reporting
Prior LakeNone0
ShakopeeNone2

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Savage

SiteTypeDistanceMedianSamplesYears
CREDIT R AT HIDDEN VALLEY PK IN SAVAGE, MN
Minnesota Pollution Control Agency - Ambient Surface Water (State)
River/Stream 1.1 mi347 mg/L12025
MINNESOTA R AT RIVER MI 15, .5 MI N OF MN-101 IN BLOOMINGTON
Minnesota Pollution Control Agency - Ambient Surface Water (State)
River/Stream 2.1 mi335 mg/L42021
PDCT-U11 115N22W24DBCDDC01 0000163491
USGS Minnesota Water Science Center
Well 2.2 mi259 mg/L22007–2018
Rice
Minnesota Pollution Control Agency - Ambient Surface Water (State)
Lake 2.7 mi443 mg/L92024
I35W Bridge, 3 Miles North of Savage, MN
Minnesota Pollution Control Agency - Ambient Surface Water (State)
River/Stream Perennial 2.8 mi430 mg/L102014–2015
Rice
Minnesota Pollution Control Agency - Ambient Surface Water (State)
Lake 2.9 mi438 mg/L92024

Water hardness in towns near Savage

TownDistanceMedianClass
Burnsville4 mi 340 mg/LVery hard
Prior Lake4 mi 309 mg/LVery hard
Bloomington5 mi 259 mg/LVery hard
Shakopee6 mi 333 mg/LVery hard
Eden Prairie8 mi 331 mg/LVery hard
Lakeville8 mi 322 mg/LVery hard
Apple Valley8 mi 330 mg/LVery hard
Richfield9 mi 240 mg/LVery hard
Edina9 mi 252 mg/LVery hard
Eagan11 mi 248 mg/LVery hard

Scott County

Savage is in Scott County, where the median is 348 mg/L (very hard) across 30 sites.

See all of Scott County →

Minnesota

The statewide median is 190 mg/L (very hard) from 2,553 sites.

Minnesota hardness map →

Savage, MN water: common questions

Do I need a water softener in Savage?

Very likely. Water measured around Savage is 19.6 gpg (335 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 34,000 grains.Size it for your household →

Who supplies Savage's drinking water?

The main public water system serving Savage in EPA records is Savage. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Savage?

It depends on what you want to remove. In Savage, the system had 2 health-based violations since 2016, for Combined Radium (-226 and -228); the utility's annual report says what was done about them. On the other hand, no PFAS found in EPA testing and no lead service lines reported. A water softener is not a filter.How to read your water quality report →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next