Water hardness in Melvindale, MI

Water in Melvindale is very hard, with a median of 646 mg/L (37.7 grains per gallon) across 8 monitoring sites within 10 miles.

331% harder than the Michigan median (150 mg/L) 5th hardest of 101 Michigan towns Population 12,402
646mg/L
37.7 grains per gallon
Very hard

Melvindale tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 646 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 37.7 gpg (36.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites8
Lab samples131
Sample years2000–2021
Middle 50% of sites455–918 mg/L
Groundwater (wells, springs)812 mg/L · 6 sites
Surface water (rivers, lakes)205 mg/L · 2 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Melvindale

Prefilled with Melvindale's measured local hardness of 646 mg/L (37.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Melvindale tap water

The City of Melvindale water system is the main public water system for Melvindale. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jan 2025 – Oct 2025. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Melvindale

Water systemPFAS detectedHighest PFOA / PFOSTested
Allen Park
serves over 10,000 people
6:2 FTS — Jan 2023 – Oct 2023
Dearborn
serves over 10,000 people
None detected — Aug 2024 – May 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Melvindale

The City of Melvindale water system reported 3,894 service lines (the pipes connecting homes to the water main) in its inventory. 8 are lead and 1 are galvanized lines that must be replaced, and 2,750 are still of unknown material.

8lead (<1%)
1galvanized requiring replacement
2,750unknown material (71%)
1,135not lead (29%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Melvindale water system whether your address is on its list.

Other water systems serving parts of Melvindale

Water systemService linesTotal
Allen Park236 lead · 0 galvanized · 0 unknown11,847
Dearborn5,271 lead · 0 galvanized · 4,625 unknown32,736

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Melvindale drinking water violations

EPA records show 1 health-based violation for the City of Melvindale water system since 2016, all since resolved or closed. The most recent began in Oct 2020. It also had 6 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Lead and Copper Rule
corrosion control, testing and notification requirements for lead
Treatment requirement not met 1 Oct 2020 Resolved/closed

Other water systems serving parts of Melvindale

Water systemHealth-based violationsMonitoring/reporting
Allen ParkNone5
DearbornNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Melvindale

SiteTypeDistanceMedianSamplesYears
RIVER ROUGE AT JEFFERSON AVE AT RIVER ROUGE, MI
USGS Michigan Water Science Center
Stream 2.7 mi150 mg/L722000–2013
RIVER ROUGE AT DETROIT, MI
USGS Michigan Water Science Center
Stream 7.5 mi260 mg/L152011–2014
RECOVERY PARK CENTRAL 01 SHALLOW (RP-C 01 S)
USGS Michigan Water Science Center
Well 9.4 mi520 mg/L22020–2021
RECOVERY PARK CENTRAL 01 DEEP (RP-C 01 D)
USGS Michigan Water Science Center
Well 9.4 mi1710 mg/L102020–2021
RECOVERY PARK CENTRAL 02 DEEP (RP-C 02 D)
USGS Michigan Water Science Center
Well 9.4 mi526 mg/L102020–2021
R. PARK CENTRAL 02 SHALLOW REPLACED (RP-C-02 SR)
USGS Michigan Water Science Center
Well 9.4 mi858 mg/L42020

Water hardness in towns near Melvindale

TownDistanceMedianClass
Allen Park2 mi 350 mg/LVery hard
Lincoln Park2 mi 350 mg/LVery hard
Dearborn3 mi 102 mg/LModerately hard
Wyandotte5 mi 350 mg/LVery hard
Southgate5 mi 350 mg/LVery hard
Taylor6 mi 270 mg/LVery hard
Dearborn Heights7 mi 328 mg/LVery hard
Inkster7 mi 270 mg/LVery hard
Riverview7 mi 350 mg/LVery hard
Detroit8 mi 116 mg/LModerately hard

Wayne County

Melvindale is in Wayne County, where the median is 350 mg/L (very hard) across 14 sites.

See all of Wayne County →

Michigan

The statewide median is 150 mg/L (hard) from 1,435 sites.

Michigan hardness map →

Melvindale, MI water: common questions

Do I need a water softener in Melvindale?

Very likely. Water measured around Melvindale is 37.7 gpg (646 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 65,000 grains.Size it for your household →

Who supplies Melvindale's drinking water?

The main public water system serving Melvindale in EPA records is Melvindale. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Melvindale?

It depends on what you want to remove. In Melvindale, the system reports 8 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 1 health-based violation since 2016, for the Lead and Copper Rule; the utility's annual report says what was done about it. On the other hand, no PFAS found in EPA testing. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next