Water hardness in Grayslake, IL
Water in Grayslake is very hard, with a median of 280 mg/L (16.4 grains per gallon) across 11 monitoring sites within 10 miles.
Grayslake tap water at a glance
- HardnessVery hard (280 mg/L, 16.4 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesThe water system reported 334 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 280 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 16.4 gpg (15.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Grayslake
Prefilled with Grayslake's measured local hardness of 280 mg/L (16.4 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Grayslake tap water
The City of Grayslake water system is the main public water system for Grayslake. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Mar 2023 – Dec 2023. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Grayslake
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Libertyville serves over 10,000 people | PFBA | — | May 2023 – Feb 2024 |
| Lindenhurst serves over 10,000 people | None detected | — | Apr 2024 – Jan 2025 |
| Mundelein serves over 10,000 people | None detected | — | Apr 2024 – Jan 2025 |
| Wildwood Subdivision - Lake Co PW serves over 10,000 people | None detected | — | Mar 2025 – Dec 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Grayslake
The City of Grayslake water system reported 7,584 service lines (the pipes connecting homes to the water main) in its inventory. 334 are lead and 0 are galvanized lines that must be replaced, and 184 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Grayslake water system whether your address is on its list.
Other water systems serving parts of Grayslake
| Water system | Service lines | Total |
|---|---|---|
| Libertyville | 310 lead · 0 galvanized · 575 unknown | 7,379 |
| Lindenhurst | 0 lead · 0 galvanized · 439 unknown | 5,225 |
| Mundelein | 46 lead · 52 galvanized · 32 unknown | 10,901 |
| Wildwood Subdivision - Lake Co PW | 0 lead · 0 galvanized · 0 unknown | 4,683 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Grayslake drinking water violations
EPA records show no health-based violations for the City of Grayslake water system since 2016.
Other water systems serving parts of Grayslake
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Libertyville | None | 1 |
| Lindenhurst | None | 11 |
| Mundelein | None | 2 |
| Wildwood Subdivision - Lake Co PW | None | 2 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Grayslake
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| BULL C BELOW MILWAUKEE AVE NEAR LIBERTYVILLE,IL USGS Illinois Water Science Center | Stream | 4.1 mi | 280 mg/L | 1 | 2000 |
| Des Plaines River illinois epa (State) | River/Stream | 4.7 mi | 280 mg/L | 26 | 2000–2002 |
| 45N10E- 4.4g2 USGS Illinois Water Science Center | Well | 5.4 mi | 382 mg/L | 2 | 2013–2023 |
| 45N11E-15.1f USGS Illinois Water Science Center | Well | 6.2 mi | 241 mg/L | 1 | 2000 |
| 45N11E-14.8g USGS Illinois Water Science Center | Well | 6.3 mi | 704 mg/L | 2 | 2010–2021 |
| 44N11E-28.1e USGS Illinois Water Science Center | Well | 7 mi | 211 mg/L | 3 | 2000–2021 |
Water hardness in towns near Grayslake
| Town | Distance | Median | Class |
|---|---|---|---|
| Gages Lake | 3 mi | 254 mg/L | Very hard |
| Round Lake | 4 mi | 396 mg/L | Very hard |
| Round Lake Beach | 4 mi | 337 mg/L | Very hard |
| Mundelein | 5 mi | 280 mg/L | Very hard |
| Libertyville | 5 mi | 238 mg/L | Very hard |
| Lindenhurst | 5 mi | 330 mg/L | Very hard |
| Gurnee | 5 mi | 254 mg/L | Very hard |
| Wauconda | 7 mi | 389 mg/L | Very hard |
| Vernon Hills | 8 mi | 254 mg/L | Very hard |
| Waukegan | 9 mi | 241 mg/L | Very hard |
Lake County
Grayslake is in Lake County, where the median is 258 mg/L (very hard) across 23 sites.
See all of Lake County →Grayslake, IL water: common questions
Do I need a water softener in Grayslake?
Very likely. Water measured around Grayslake is 16.4 gpg (280 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 29,000 grains.Size it for your household →
Who supplies Grayslake's drinking water?
The main public water system serving Grayslake in EPA records is Grayslake. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Grayslake?
It depends on what you want to remove. In Grayslake, the system reports 334 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- How to tell if your home has a lead pipe334 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.