Water hardness in Belvidere, IL
Water in Belvidere is very hard, with a median of 353 mg/L (20.6 grains per gallon) across 21 monitoring sites within 10 miles.
Belvidere tap water at a glance
- HardnessVery hard (353 mg/L, 20.6 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS1 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesThe water system reported 206 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 353 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 20.6 gpg (19.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Belvidere
Prefilled with Belvidere's measured local hardness of 353 mg/L (20.6 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Belvidere tap water
The City of Belvidere water system is the main public water system for Belvidere. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 10 samples taken Sep 2024 – Mar 2025. 1 PFAS was detected. Every result with a federal limit was at or below it.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFHxS perfluorohexane sulfonic acid | 5.5 ppt | 2 of 10 samples | 10 ppt* |
Other water systems serving parts of Belvidere
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Cherry Valley serves 10,000 people or fewer | None detected | — | Jan 2023 – Jul 2023 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Belvidere
The City of Belvidere water system reported 7,784 service lines (the pipes connecting homes to the water main) in its inventory. 206 are lead and 0 are galvanized lines that must be replaced, and 1,898 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Belvidere water system whether your address is on its list.
Other water systems serving parts of Belvidere
| Water system | Service lines | Total |
|---|---|---|
| Cherry Valley | 0 lead · 0 galvanized · 0 unknown | 2,226 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Belvidere drinking water violations
EPA records show no health-based violations for the City of Belvidere water system since 2016. It also had 4 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Belvidere
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Cherry Valley | 2 | 3 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Belvidere
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| 44N 3E-32.1h1 USGS Illinois Water Science Center | Well | 1.2 mi | 325 mg/L | 1 | 2000 |
| Beaver Creek illinois epa (State) | River/Stream | 1.6 mi | 335 mg/L | 3 | 2001 |
| 44N 3E-32.5f1 USGS Illinois Water Science Center | Well | 1.7 mi | 363 mg/L | 1 | 2000 |
| 44N 3E-32.7g1 USGS Illinois Water Science Center | Well | 1.7 mi | 385 mg/L | 1 | 2001 |
| 44N 3E-32.7g2 USGS Illinois Water Science Center | Well | 1.7 mi | 402 mg/L | 1 | 2001 |
| 44N 3E-34.2a1 USGS Illinois Water Science Center | Well | 2.1 mi | 316 mg/L | 2 | 2007–2017 |
Water hardness in towns near Belvidere
| Town | Distance | Median | Class |
|---|---|---|---|
| Loves Park | 8 mi | 331 mg/L | Very hard |
| Rockford | 9 mi | 336 mg/L | Very hard |
| Machesney Park | 10 mi | 342 mg/L | Very hard |
| Roscoe | 13 mi | 324 mg/L | Very hard |
| Sycamore | 21 mi | 337 mg/L | Very hard |
| Woodstock | 23 mi | 393 mg/L | Very hard |
| Huntley | 24 mi | 389 mg/L | Very hard |
| DeKalb | 24 mi | 324 mg/L | Very hard |
| Pingree Grove | 26 mi | 398 mg/L | Very hard |
| Crystal Lake | 28 mi | 401 mg/L | Very hard |
Boone County
Belvidere is in Boone County, where the median is 344 mg/L (very hard) across 16 sites.
See all of Boone County →Belvidere, IL water: common questions
Do I need a water softener in Belvidere?
Very likely. Water measured around Belvidere is 20.6 gpg (353 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 36,000 grains.Size it for your household →
Who supplies Belvidere's drinking water?
The main public water system serving Belvidere in EPA records is Belvidere. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Belvidere?
It depends on what you want to remove. In Belvidere, EPA testing found PFHxS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 206 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 1 PFAS in Belvidere's main water system.
- How to tell if your home has a lead pipe206 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.