Water hardness in Clearwater, FL
Water in Clearwater is hard, with a median of 149 mg/L (8.7 grains per gallon) across 27 monitoring sites within 10 miles.
Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Clearwater can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.
Clearwater tap water at a glance
- HardnessHard (149 mg/L, 8.7 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFAS3 found; the highest PFOS result was above EPA's 4 ppt limit (a single result is not a violation).Filters that remove PFAS →
- Lead pipesNo known lead lines; 34,094 lines are still of unknown material.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 149 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 8.7 gpg (8.3 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Clearwater
Prefilled with Clearwater's measured local hardness of 149 mg/L (8.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Clearwater tap water
Clearwater Water System is the main public water system for Clearwater. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 28 samples taken Jul 2024 – Sep 2025. 3 PFAS were detected. The highest PFOS result was above EPA's drinking water limit (4 ppt).
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFOS perfluorooctane sulfonic acid | 5.9 ppt | 1 of 28 samples | 4 ppt |
| PFPeA perfluoropentanoic acid | 3.5 ppt | 6 of 28 samples | — |
| PFBS perfluorobutane sulfonic acid | 3 ppt | 1 of 28 samples | — |
Other water systems serving parts of Clearwater
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Pinellas County Utilities serves over 10,000 people | None detected | — | Jul 2023 – Apr 2024 |
| Dunedin Water System serves over 10,000 people | None detected | — | Jan 2023 – Jul 2023 |
| Safety Harbor Water Dept serves over 10,000 people | PFPeA | — | Apr 2024 – Jan 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Clearwater
Clearwater Water System reported 36,306 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 34,094 lines are still of unknown material.
Other water systems serving parts of Clearwater
| Water system | Service lines | Total |
|---|---|---|
| Pinellas County Utilities | 0 lead · 6,472 galvanized · 63,789 unknown | 115,604 |
| Dunedin Water System | 0 lead · 0 galvanized · 0 unknown | 14,509 |
| Safety Harbor Water Dept | 0 lead · 0 galvanized · 7,071 unknown | 7,071 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Clearwater drinking water violations
EPA records show no health-based violations for Clearwater Water System since 2016. It also had 9 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Clearwater
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Pinellas County Utilities | None | 18 |
| Dunedin Water System | None | 32 |
| Safety Harbor Water Dept | None | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Clearwater
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Z4-SS-5021R STEVENSON CREEK FL Dept. of Environmental Protection | River/Stream | 1.2 mi | 146 mg/L | 1 | 2011 |
| DUNEDIN WELL NO. 29 AAH0641 USGS Florida Water Science Center | Well | 1.7 mi | 398 mg/L | 1 | 2015 |
| Z4SL9037 FL Dept. of Environmental Protection | Lake | 1.7 mi | 79 mg/L | 1 | 2015 |
| Z4LL6001 FL Dept. of Environmental Protection | Lake | 1.9 mi | 112 mg/L | 1 | 2012 |
| Z4-SS-5037 ALLEN CREEK FL Dept. of Environmental Protection | River/Stream | 3 mi | 149 mg/L | 1 | 2011 |
| Z4SS7025 FL Dept. of Environmental Protection | River/Stream | 3.9 mi | 130 mg/L | 1 | 2013 |
Water hardness in towns near Clearwater
| Town | Distance | Median | Class |
|---|---|---|---|
| Dunedin | 4 mi | 142 mg/L | Hard |
| Safety Harbor | 5 mi | 136 mg/L | Hard |
| Largo | 5 mi | 146 mg/L | Hard |
| Palm Harbor | 7 mi | 146 mg/L | Hard |
| Oldsmar | 8 mi | 121 mg/L | Hard |
| Pinellas Park | 9 mi | 149 mg/L | Hard |
| Seminole | 9 mi | 146 mg/L | Hard |
| East Lake | 11 mi | 104 mg/L | Moderately hard |
| West Lealman | 11 mi | 150 mg/L | Hard |
| Westchase | 11 mi | 111 mg/L | Moderately hard |
Pinellas County
Clearwater is in Pinellas County, where the median is 149 mg/L (hard) across 45 sites.
See all of Pinellas County →Clearwater, FL water: common questions
Do I need a water softener in Clearwater?
Many homes here use one. Water measured around Clearwater is 8.7 gpg (149 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 15,000 grains.Size it for your household →
Who supplies Clearwater's drinking water?
The main public water system serving Clearwater in EPA records is Clearwater Water System. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Clearwater?
It depends on what you want to remove. In Clearwater, EPA testing found PFOS, PFPeA and PFBS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 3 PFAS in Clearwater's main water system.
- How to tell if your home has a lead pipe34,094 service lines here are of unknown material.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.