Water hardness in Giles County, VA
Water in Giles County is moderately hard, with a median of 61 mg/L (3.5 grains per gallon) across 26 monitoring sites.
Giles County water at a glance
- HardnessModerately hard (61 mg/L, 3.5 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 61 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 3.5 gpg (3.4 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Giles County
Prefilled with Giles County's measured local hardness of 61 mg/L (3.6 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Giles County on the Virginia map
Cities and communities in Giles County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Pearisburg | 69 | Moderately hard | 15 sites within 10 miles |
| Narrows | 65 | Moderately hard | 14 sites within 10 miles |
| Pembroke | 72 | Moderately hard | 17 sites within 10 miles |
| Rich Creek | 96 | Moderately hard | 9 sites within 10 miles |
| Glen Lyn | 83 | Moderately hard | 10 sites within 10 miles |
| Eggleston (CDP) | 72 | Moderately hard | 21 sites within 10 miles |
| Ripplemead (CDP) | 64 | Moderately hard | 15 sites within 10 miles |
Water quality in Giles County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Pearisburg | Town of Pearisburg | None detected | 0 lead · 0 unknown | None |
| Narrows | Town of Narrows | None detected | 0 lead · 0 unknown | None |
| Pembroke | Town of Pembroke | Not tested | 0 lead · 0 unknown | 2 |
| Rich Creek | Town of Rich Creek | Not tested | 0 lead · 0 unknown | None |
| Glen Lyn | Town of Glen LYN | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Radford city248 mg/L
- Pulaski County40 mg/L
- Montgomery County215 mg/L
- Bland County20 mg/L
- Craig County36 mg/L
- Roanoke County190 mg/L
Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.