Water hardness in Eddy County, NM
Water in Eddy County is very hard, with a median of 1535 mg/L (89.7 grains per gallon) across 33 monitoring sites.
Eddy County water at a glance
- HardnessVery hard (1,535 mg/L, 89.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 1535 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 89.7 gpg (86 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Eddy County
Prefilled with Eddy County's measured local hardness of 1535 mg/L (89.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Eddy County on the New Mexico map
Cities and communities in Eddy County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Carlsbad | 1,532 | Very hard | 6 sites within 10 miles |
| Artesia | 1,512 | Very hard | 3 sites within 10 miles |
| Loving | 1,735 | Very hard | 9 sites within 10 miles |
| La Huerta (CDP) | 1,532 | Very hard | 4 sites within 10 miles |
| Atoka (CDP) | 1,092 | Very hard | 4 sites within 10 miles |
| Livingston Wheeler (CDP) | 1,532 | Very hard | 6 sites within 10 miles |
| Happy Valley (CDP) | 1,532 | Very hard | 6 sites within 10 miles |
| Morningside (CDP) | 1,280 | Very hard | 5 sites within 10 miles |
| Malaga (CDP) | 1,735 | Very hard | 9 sites within 10 miles |
| Loco Hills (CDP) | 1,535 | Very hard | county median |
| Hope | 1,535 | Very hard | county median |
| Whites City (CDP) | 1,112 | Very hard | 6 sites within 10 miles |
Water quality in Eddy County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Carlsbad | Carlsbad Municipal Water System | None detected | 0 lead · 10,902 unknown | None |
| Artesia | Artesia Municipal Water System | None detected | 0 lead · 4,415 unknown | 17 |
| Loving | Loving Water System | Not tested | 0 lead · 0 unknown | 15 (6 open) |
| Malaga | Malaga MDWC Swa | Not tested | 0 lead · 0 unknown | 2 |
| Loco Hills | Caprock Water Company | Not tested | 0 lead · 0 unknown | None |
| Hope | Hope Water System | Not tested | 0 lead · 52 unknown | None |
| Whites City | Whites City Water System | Not tested | Not reported | 2 |
Neighboring counties
- Lea County298 mg/L
- Chaves County800 mg/L
- Otero County460 mg/L
- Lincoln County360 mg/L
- Roosevelt County238 mg/L
- De Baca County1195 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.