Water hardness in Dunklin County, MO
Water in Dunklin County is hard, with a median of 169 mg/L (9.9 grains per gallon) across 8 monitoring sites.
Dunklin County water at a glance
- HardnessHard (169 mg/L, 9.9 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 169 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 9.9 gpg (9.5 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Dunklin County
Prefilled with Dunklin County's measured local hardness of 169 mg/L (9.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Dunklin County on the Missouri map
Cities and communities in Dunklin County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Kennett | 151 | Hard | 3 sites within 10 miles |
| Malden | 169 | Hard | county median |
| Campbell | 150 | Hard | 3 sites within 10 miles |
| Senath | 169 | Hard | county median |
| Clarkton | 134 | Hard | 7 sites within 10 miles |
| Holcomb | 151 | Hard | 3 sites within 10 miles |
| Cardwell | 169 | Hard | county median |
| Hornersville | 198 | Very hard | 4 sites within 10 miles |
| Arbyrd | 169 | Hard | county median |
| Rives | 189 | Very hard | 5 sites within 10 miles |
| Frisbee (CDP) | 151 | Hard | 3 sites within 10 miles |
| Hollywood (CDP) | 169 | Hard | county median |
| White Oak (CDP) | 151 | Hard | 3 sites within 10 miles |
Water quality in Dunklin County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Kennett | Kennett PWS | 1 found | 0 lead · 4,503 unknown | None |
| Malden | Malden PWS | None detected | 0 lead · 300 unknown | 1 |
| Campbell | Campbell PWS | None detected | 0 lead · 547 unknown | None |
| Senath | Senath PWS | Not tested | 0 lead · 0 unknown | 1 |
| Clarkton | Clarkton PWS | Not tested | 0 lead · 2 unknown | 4 |
| Holcomb | Holcomb PWS | Not tested | Not reported | None |
| Cardwell | Cardwell PWS | Not tested | 0 lead · 325 unknown | None |
| Hornersville | Hornersville PWS | Not tested | 0 lead · 253 unknown | 2 |
| Arbyrd | Arbyrd PWS | Not tested | 0 lead · 27 unknown | None |
| Rives | Pemiscot County Con PWSD 1 | None detected | 0 lead · 0 unknown | None |
Neighboring counties
- Pemiscot County98 mg/L
- New Madrid County158 mg/L
- Butler County258 mg/L
- Stoddard County151 mg/L
- Ripley County156 mg/L
- Mississippi County160 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.