Why does my toilet keep running?

Updated November 21, 2026 · Based on EPA and other public sources listed below · How we make our content

Short answer: a toilet that keeps running is usually leaking from the tank into the bowl, and the most common cause is a worn-out flapper, the rubber seal at the bottom of the tank. EPA says a worn flapper can silently leak thousands of gallons a year. Check it with the 10-minute food coloring test below.

Test for a leak in 10 minutes

  1. Lift the tank lid and add a few drops of food coloring to the water in the tank. (In Australia and New Zealand the tank is called the cistern.)
  2. Don't flush. Wait 10 minutes.
  3. If any color shows up in the bowl, water is getting past the seal. EPA's rule: color in the bowl after 10 minutes means you have a leak.

Flush afterwards so the dye doesn't stain the bowl.

Why a toilet keeps running

  • Worn flapper (most common). EPA says most toilet leaks are due to old or worn-out flappers. When the rubber hardens or warps, water seeps into the bowl, the tank level drops and the fill valve keeps topping it up. That is the "running on and off" sound many people hear between flushes.
  • Flapper not closing. A chain that is too short or tangled can hold the flapper slightly open after a flush.
  • Water level set too high. If the fill valve lets the water rise above the top of the overflow tube, water runs straight down the tube into the bowl and the toilet never stops filling.

EPA advises replacing flappers at least every five years to keep a good seal. Flappers are sold to fit specific toilets, so take the old one with you or check the model number inside the tank.

How much water a running toilet wastes

EPA's figures for household leaks in the United States:

MeasureEPA figure
Worn toilet flappercan leak thousands of gallons a year
Average household, all leaksmore than 9,300 gallons a year (about 35,000 litres)
Homes with leaks wasting 50+ gallons a day9%

Because the water is metered, a running toilet shows up on your water bill. If your bill jumps without a change in how you use water, the food coloring test is the first thing to try.

Repair or replace the toilet?

A new flapper fixes most running toilets. If the toilet is old, replacing it also cuts how much water every flush uses: EPA says older toilets can use as much as 6 gallons per flush, compared with 1.6 gallons for the current federal standard and 1.28 gallons or less for WaterSense models. See how much water a toilet uses per flush.

Related: a leaking water heater is the other common hidden leak in a home. To see how hard your water is, which matters for valves and fixtures, find your town on the water hardness map.

Frequently asked questions

Why does my toilet keep running?

The most common reason is an old or worn-out flapper, the rubber seal at the bottom of the tank. EPA says most toilet leaks come from worn flappers, which let water seep from the tank into the bowl so the tank keeps refilling.

How do I know if my toilet is leaking?

Put a few drops of food coloring in the tank and don't flush. EPA says if any color shows up in the bowl after 10 minutes, the toilet is leaking.

How much water does a running toilet waste?

EPA says a worn flapper can silently leak thousands of gallons a year. Across all household leaks, the average home wastes more than 9,300 gallons a year.

How often should a toilet flapper be replaced?

EPA advises replacing flappers at least every five years to keep a good seal.

Sources

Related guides