Boil water notice: what to do
Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: under a boil water notice, use bottled water or bring tap water to a rolling boil for at least 1 minute (3 minutes above 5,000 feet), then let it cool. If you can't boil, EPA's backup is 8 drops of 6% unscented bleach per gallon, wait 30 minutes. Always follow your utility's notice, which may add instructions.
How to boil water (EPA steps)
- If the water is cloudy, let it settle and filter it through a clean cloth, paper towel or coffee filter.
- Bring it to a rolling boil for at least one minute. Above 5,000 feet (1,000 meters), boil for three minutes.
- Let it cool naturally and store it in clean containers with covers.
- To improve the flat taste, add a pinch of salt per quart or liter, or pour it between clean containers a few times.
If you can't boil: disinfect with bleach (EPA steps)
- Use regular, unscented chlorine bleach labeled for disinfection (6% or 8.25% sodium hypochlorite). Not scented, color-safe or bleach with added cleaners.
- Per gallon of water: 8 drops of 6% bleach or 6 drops of 8.25% bleach. Double it if the water is cloudy, colored or very cold.
- Stir and let stand 30 minutes. It should smell slightly of chlorine; if not, repeat the dose and wait another 15 minutes.
What boiling does not fix
Boiling and disinfection kill most germs, but EPA notes they do not remove heavy metals, salts and most other chemicals, such as lead, nitrate, arsenic or PFAS. A boil water notice is about germs only.
Check your town
Your town's page shows its water system's record of health-based violations, including bacteria and treatment rule violations. Find your town →
Frequently asked questions
How long should you boil water during a boil water notice?
EPA says to bring water to a rolling boil for at least one minute, or three minutes at altitudes above 5,000 feet (1,000 meters), then let it cool.
How do I disinfect water with bleach if I can't boil it?
EPA says to use regular unscented chlorine bleach: for example 8 drops of 6% bleach or 6 drops of 8.25% bleach per gallon of water, doubled if the water is cloudy, colored or very cold. Stir and wait 30 minutes; the water should smell slightly of chlorine.
Does boiling water remove chemicals?
No. EPA notes that boiling and disinfection kill most disease-causing microorganisms but do not destroy heavy metals, salts and most other chemicals.
What if the water is cloudy?
EPA says to let it settle and filter it through a clean cloth, paper towel or coffee filter before boiling or disinfecting.